![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
Wish I would have known this a couple years ago, I ran my own lines, lol.
2018 Supra SA400 aka The Ron Burgandy
2011 Sea-Doo Wake 155
2015 Mojo Surf, sold...2013 Axis A22 Recon Edition, sold...2010 Axis A22, sold...2007 Maxum 1800sr3, sold
how is the light any pics?
What the heck. Their whole sales pitch was that it works without interfering with the wakeplate. Mine is still in the box. I had my work cut out for me fishing out the fogging straw that I shot into one of my cylinders when I winterized in the fall. That's 7 hours of my life I'll never get back....
Sent from my SM-G930W8 using Tapatalk
2016 Craz.
Enzo bags.
Maybe on all the other boats, but the fact is our drain plug is way to close to the wake plate. I modified it in 5 minutes on my mini belt sander. I had to take breaks and cool it off a few times as the bitch gets hot grinding it and I didn’t want to screw up the LEDs by getting them too hot. The manufacturer even says do t leave them op out of the water if they will burn out. I tested them for 30 seconds a coupe of times as I was wiring them up and it was fine. There a bunch of wires that need solder g so o wanted to be sure it was all good before I glued the bitch in!
Sent from my iPhone using Tapatalk
2017 Moomba Craz
so i contacted customer service and sent them a pic of the drain plug per there request... they said the mormo should fit without modification. i ordered one. i will update after i install it.