April 2018 Picture Thread

[bergermaister]

How did you raise the seat? I've explored a few options but due to the short pedestal I can't find anything adjustable. I'm thinking some aluminum channel as a spacer on the top rails since I don't want to buy a bolster seat and have to have it reupholstered to match.

[wiker5]

How did you raise the seat? I've explored a few options but due to the short pedestal I can't find anything adjustable. I'm thinking some aluminum channel as a spacer on the top rails since I don't want to buy a bolster seat and have to have it reupholstered to match.

I love you interior colors and details, I took the seat post off and had a welder add a extension the same size, it's not adjustable but 90 percent of the time I'd want the seat bolstered so I said screw it and will have it raised all the time. I thought about removing the seat part of the cushion and having an identical match made with 5-6 inches of extra foam and keep both on the boat and swap when necessary.

[ssevey17]

I love you interior colors and details, I took the seat post off and had a welder add a extension the same size, it's not adjustable but 90 percent of the time I'd want the seat bolstered so I said screw it and will have it raised all the time. I thought about removing the seat part of the cushion and having an identical match made with 5-6 inches of extra foam and keep both on the boat and swap when necessary.

That is what I was looking at doing. I thought about buying an adjustable base but I don't think it's worth it. I'm going to just well up some pipe for an extension.

[BigOrange]

Guys.....there was a thread on here last fall about stock seat riser extensions. Before going to the trouble of welding / fabbing, I'd look into what is already on the market. Maybe it doesn't fit your configuration?