Results 1 to 6 of 6
Thread: Swim platform!
-
03-05-2018, 07:04 PM #1Junior Member
- Join Date
- Mar 2017
- Location
- Dothan, Al
- Posts
- 8
Swim platform!
needing a little help i have looked all over the internet trying to find a swim platform. Went to load my boat up last summer this passed summer and noticed mine was gone, i kept avoiding not fixing the clip i had on their and it bit me. Can someone point me in the right direction to where i will be able to find one closest to original as possible?
Last edited by msnellgrove213; 03-05-2018 at 07:08 PM.
2003 Moomba Outback Ls
-
03-05-2018, 09:42 PM #2Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Order the brackets and then make it out of Hdpe plastic or teak wood. Otherwise it's gonna be very expensive. There's threads on here with lots of designs.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
03-06-2018, 11:22 AM #3Senior Member
- Join Date
- Apr 2014
- Location
- Owensboro, KY
- Posts
- 204
I have a factory Platform off a 2008 Moomba that I would sell. PM me
-
03-06-2018, 10:25 PM #4
I like the HDPE route. I assume the teak would be pretty expensive new, unless you could find a used teak platform and modify it. The guys on the supra forums are doing this type reno on the older boats.
For some reason, I like the teak on the MCs when they are oiled up.2018 Supra SL400
-
06-12-2018, 07:57 PM #5Junior Member
- Join Date
- Jun 2018
- Posts
- 4
Still have the platform?
-
06-13-2018, 10:19 AM #62008 OBV
325 EFI with closed cooling
Gravity III with 750's in the rear, 400 stock floor, 750 IBS
Servo valve ballast upgrade
Wetsounds Rev10
JL Amps, WS420BT
2000 Outback LS <-- Sold!!!
310 Carb Direct Drive
800# Rear Locker
750# IBS (should have kept this for the OBV)
Dual Batteries with 2 Bank Charger System
Kenwood Head with Remotes
Too many hours restoring exterior from prior negligence to count!