Plug for moomba ballast bag

[stx.dead.I]

Got an 03 mobius that I am doing the reversible ballast upgrade kit for. So now instead of running two hoses to each bag I only have one which leaves an unused hole. How did y'all plug this second hole?

Sent from my SM-G955U using Tapatalk

[KnoxMojo]

Wakemakers should have all the fittings you need for your bags

[stx.dead.I]

Wakemakers should have all the fittings you need for your bags

Ya I called and they had no idea how to plug it which stinks cause I'm putting in an order there soon already

Sent from my SM-G955U using Tapatalk

[KnoxMojo]

Post up a picture of your bag, maybe someone here will have some knowledge for you.

[moombahighrider]

Ya I called and they had no idea how to plug it which stinks cause I'm putting in an order there soon already

Sent from my SM-G955U using Tapatalk

This makes no sense. They have most all fittings. Is your bag a fly high? They make threaded caps for the holes

[stx.dead.I]

Dunno what manufacturer but it's the factory gravity III system bag

Sent from my SM-G955U using Tapatalk

[moombahighrider]

Dunno what manufacturer but it's the factory gravity III system bag

Sent from my SM-G955U using Tapatalk

One of these?

http://barefootinternational.com/FATSACS.bifh

[moombahighrider]

One of these?

http://barefootinternational.com/FATSACS.bifh

If so:

https://www.wakemakers.com/fly-high-...ting-w731.html

[stx.dead.I]

Will snap a pic when I finish my workout in about 20 mins

Sent from my SM-G955U using Tapatalk

[stx.dead.I]

Change of plans, I was looking at the bags to snap pics of the fitting and the old bags had caps on some of the fittings already so I stripped them off for the ski locker bag

Sent from my SM-G955U using Tapatalk