Results 1 to 10 of 24
Thread: 2016 Craz Tower Wiring
-
06-11-2017, 04:22 PM #1Senior Member
- Join Date
- Jul 2016
- Posts
- 116
2016 Craz Tower Wiring
I have a 2016 Craz that came from factory with two Roswell tower speakers. I would like to add two speakers to the tower. There are two more holes on each side with rubber plugs just to the inside of the current speakers. When plugs are pulled out, there are wires connected to them. I am assuming these are available for adding speakers. Can anyone tell me where the other end of these wires are. I am sure I will need to add an amp for the new speakers but I can't find where these are going. Thanks!
2016 Moomba Craz
2014 Chaparral H2O 21 Sport
1997 Sea Ray 175 Sport
-
06-11-2017, 04:59 PM #2Can anyone tell me where the other end of these wires are
I am sure I will need to add an amp for the new speakers
-
06-11-2017, 05:18 PM #3
On a 17 craz the speaker wires come out the port side of the tower , mine had about two feet of slack after it came out of the base of the tower , and were bundled up behind the cabin speakers , the starboard side has some wires that come out as well, but I believe those are for if you added a light bar
2017 Craz surf auto wake
1140 # rears wet sounds
-
06-11-2017, 05:41 PM #4
I posted the Craz tower wiring diagram a while back
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
06-11-2017, 11:21 PM #5Senior Member
- Join Date
- Jul 2016
- Posts
- 116
Stazi... Do you know where I could find that post? Also, I'm thinking about adding Wetsounds Rev 8's or Rev 10's to go with the factory Roswells. That's why I thought another amp may be handy. Thanks for all the good info guys!
2016 Moomba Craz
2014 Chaparral H2O 21 Sport
1997 Sea Ray 175 Sport
-
06-12-2017, 07:32 AM #6
2016 Craz Tower Wiring
https://forum.moomba.com/showthread....644#post302644
The A2 wiring schematic is higher up on that same page of the topic
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
06-12-2017, 07:43 AM #7Senior Member
- Join Date
- Jul 2016
- Posts
- 116
Thank so much! This really helps!
Sent from my iPhone using Tapatalk2016 Moomba Craz
2014 Chaparral H2O 21 Sport
1997 Sea Ray 175 Sport
-
06-12-2017, 10:15 AM #8
We really need to make a sticky out of those two wiring diagrams
Sent from my iPad using Tapatalk2017 Moomba Craz
-
06-12-2017, 10:33 AM #9I'm thinking about adding Wetsounds Rev 8's or Rev 10's to go with the factory Roswells
-
06-13-2017, 11:22 PM #10Senior Member
- Join Date
- Jul 2016
- Posts
- 116
That is kind of what I was thinking also. Thanks for the information!
2016 Moomba Craz
2014 Chaparral H2O 21 Sport
1997 Sea Ray 175 Sport