Results 11 to 18 of 18
Thread: Lift bunks height and width
-
03-29-2017, 07:44 PM #11Junior Member
- Join Date
- Oct 2016
- Posts
- 11
So, just got the boat and lift kit; same day. Thought lift was good to go, but then something terrible happened. The flat boards previously used for the pontoon broke, then I-beam rolled. �� Luckily, the boat wasn't lifted much when that happened. Also, we have a friend nearby and they let us put our boat on their lift and thankfully no damage or scratches. Do you have I-beam/cradle stabilizers. If so, what? Dock folks are backed up; who knows when they'll get out here. I'll go with them either way, just curious what you have?IMG_3029.jpg
Last edited by WesS; 03-29-2017 at 07:54 PM.
-
03-29-2017, 10:42 PM #12Senior Member
- Join Date
- Mar 2015
- Posts
- 134
I am unable to make sense of what your picture is trying to show. But from your description, I will offer this.
I keep my boat on a Hydrohoist lift. The bunk supports are attached to the lift in a triangulated manner to prevent rotation and falling over. Under the carpeted wooden 2x6 bunk lying flat at a slight angle to follow the hull shape, is an angle iron running full length from bunk support to bunk support for an approximate 16 foot length.
I would suggest looking at their web site to get an idea what that manufacturer does, then look to see if your lift maker supplies something like it. I guess you have learned that this is a good item to go heavy duty.2015 Mojo Surf Edition
1100 rear lockers
400+ under each rear seat
700 stock center
950 ibs
autoflow 2.0 surf tab upgrade
FAE
-
03-29-2017, 11:20 PM #13Senior Member
- Join Date
- Mar 2015
- Posts
- 134
Wait, now I understand our pic.
You need to connect the front and rear I beams together with steel at the I beam level. Not only up at bunk height.
Search for someplace like www.bh-usa.com.
Good luck.2015 Mojo Surf Edition
1100 rear lockers
400+ under each rear seat
700 stock center
950 ibs
autoflow 2.0 surf tab upgrade
FAE
-
03-31-2017, 10:56 PM #14Senior Member
- Join Date
- Mar 2015
- Posts
- 134
IMG_2884.jpg
This is the kind of boat support/cradle you want for a cable lift boat lift.2015 Mojo Surf Edition
1100 rear lockers
400+ under each rear seat
700 stock center
950 ibs
autoflow 2.0 surf tab upgrade
FAE
-
04-08-2017, 08:43 AM #15Junior Member
- Join Date
- Oct 2016
- Posts
- 11
I didn't want to go with wood, but after weighing options, I went with two 2x10s bolted together and covered with Overton's Malibu carpet (perfect fit). IMG_3051.jpgIMG_3052.jpg
-
07-03-2017, 05:05 PM #16Junior Member
- Join Date
- Jul 2017
- Posts
- 3
Measure the distance between the two longest bunks on your trailer and match up to that !
-
08-12-2019, 04:31 PM #17Junior Member
- Join Date
- Aug 2019
- Posts
- 2
I have a 4400 lb cap Hydrohoist and I was looking at getting a 2015 Mojo. Is your lift the 4400 lb cap?
-
08-15-2019, 07:25 PM #18Junior Member
- Join Date
- Oct 2016
- Posts
- 11