Results 11 to 20 of 20
Thread: Moomba OZ HD Swivels?
-
01-29-2017, 12:26 AM #11
Looks like you didn't get a pair.
Also note that those appear to be the first generation that didn't stay locked when under way. The new ones have holes for the pin that go all the way thru. If you cannot get it swapped out, you should be able to drill a new detent at the 90° mark.Joe
2014 LSV
2010 Outback V - Sold
1993 Echelon
-
01-29-2017, 12:32 AM #122015 Mondo
Upgraded 900lb Rears, 250lb under Port Seat & 750lb IBS
2079 Prop
Auto Flow 2.0
Kicker Stereo: 2 800.5 amps, 2 400.2 amps, 4 KM8 towers , 4 KM10 subs & 8 KM6 cabin speakers
-
01-29-2017, 12:41 AM #13
There are older threads on here that talk about them swinging in while driving. I know they are before the 2014 model year.
Joe
2014 LSV
2010 Outback V - Sold
1993 Echelon
-
01-29-2017, 12:41 PM #14
-
01-29-2017, 12:42 PM #15
-
01-29-2017, 01:51 PM #16
They will stay locked. When they were machined the tolerances on the locking pin were too tight imo. Thus making the racks difficult to lock in place.
With the weight of the racks themselves and when loaded with boards are very heavy causing the locking pin to not fit in the hole properly.
2 options: leave mechanism alone and use Wd40, when swinging racks out lift up on fingers of racks allowing the locking pin to slide into place.
Or disassemble and file pin down and drill out the hole just a little so the pin will move freely.
Sent from my iPhone using TapatalkTodd
2017 SUPRA SA450
-
02-04-2017, 01:50 PM #17
Mounted on the boat
Starboard
Port
Sent from my iPhone using Tapatalk2015 Mondo
Upgraded 900lb Rears, 250lb under Port Seat & 750lb IBS
2079 Prop
Auto Flow 2.0
Kicker Stereo: 2 800.5 amps, 2 400.2 amps, 4 KM8 towers , 4 KM10 subs & 8 KM6 cabin speakers
-
02-04-2017, 11:14 PM #18
Is that a giant, inflatable pretzel?
Sent from my iPhone using Tapatalk
-
02-04-2017, 11:31 PM #19
-
02-04-2017, 11:34 PM #20
Perfect compliment to a giant, cold beer!
Sent from my iPhone using Tapatalk