Quote Originally Posted by DRHRSH View Post
You are exactly correct. The manifolds are cooled by "raw" water and must be drained. My information says they will drain through dripless packing. Then it states if there is no crossover hose or dripless packing to remove the drain plug from each manifold.
So that would be 2 plugs
One from heat exchanger
Plastic plug from tube between trans cooler and raw water pump
One from V drive( the picture you posted)

So I believe that is 5. Sorry the picture is poor. I used the forum tools to post it? I know a larger one is in the forum, but if you want it pm me with your e mail and maybe it will come through better.
Gotcha! It all makes perfect sense now. I had a hard time finding the crossover hose on the manifolds. I ended up removing the small floor panel beneath the back seat. I found it right away. Now that I know where it is I'm sure I can access it through the small v drive access panel. It was just impossible to get a visual on the hose without removing that section of floor. It was only 4 screws, so it would be worth having a look for future winterization jobs.

Sent from my SM-G900W8 using Tapatalk