Results 1 to 5 of 5
Threaded View
-
03-12-2016, 09:15 PM #5
I deal with taper shafts for brakes on overhead cranes. We dont lap to fit and in 10 years I have never seen a brake drump come off a shaft. I understand our boats have torque but a 200% torque brake on a 600hp motor that has cycle times over 1k per hour will lose fit long before your prop. Just make sure you have a clean shaft and bore.
Work to live!!
2015 mondo
Aviator tower
Auto flow
94 rinker 180 gone