Results 1 to 7 of 7
Thread: Amp Setups
-
01-15-2015, 11:15 PM #1Member
- Join Date
- Jun 2014
- Posts
- 72
Amp Setups
Curious how everyone set up thier amps. Just a board across the 2 support stringers in the storage area and attach them to that? Stereo should be coming in shortly so I'm trying to figure out my set up.
2014 Mondo
Ski Lockers - 1000# customs
750 IBS
-
01-16-2015, 12:24 AM #2
-
01-16-2015, 12:33 AM #3Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
01-16-2015, 01:29 AM #4Member
- Join Date
- Jun 2014
- Posts
- 72
Nice setups....very clean...so what did you attach your boards to and how?
2014 Mondo
Ski Lockers - 1000# customs
750 IBS
-
01-16-2015, 08:28 AM #5
Amp Setups
ImageUploadedByTapatalk1421411119.370148.jpg
Xi800.4 power 6 SX65-Ms
2 XM30.2's - one powering a pair of XM9s, the other power a pair of SXT9s
Xi1500.1 powering 2 Kicker S10L7s (this is not pictured, it's mounted to the back of the bow seat)
My boat is .375" Starboard, and I just screwed it flat to the air intake tunnel. Hasn't moved yet2013 Outback V
-
01-16-2015, 09:33 AM #6
Amp Setups
The Moomba's come from the factory with a pair of glassed in and carpeted braces behind the observer seat along the port side wall. That is where the stock amp board screws too. Most people do the same when using different or larger boards. Simply screw through the board and into the braces with four to six #12 X 1.5" stainless screws.
Joe
2014 LSV
2010 Outback V - Sold
1993 Echelon
-
01-16-2015, 11:00 AM #7Member
- Join Date
- Jun 2014
- Posts
- 72