Results 151 to 160 of 163
-
04-21-2014, 12:30 AM #151Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: 2002 LSV Re-upolhstery & Hydroturff
Beer? What's that?
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
04-22-2014, 11:05 PM #152
2002 LSV Re-upolhstery & Hydroturff
Great work. Is that hydro turf in the cut outs for the cup holders too?
Sent from my iPad using Tapatalk HD
2007 Moomba Outback - going, going, GONE
2015 "NOT A MOOMBA"
Why Not? Play Hard! Get wet
-
04-22-2014, 11:30 PM #153Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: 2002 LSV Re-upolhstery & Hydroturff
Carpet, the hydro was the plan but the carpet was quicker..
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-15-2014, 08:43 PM #154Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: 2002 LSV Re-upolhstery & Hydroturff
Last update..
I was able to carefully remove the the covers of my 06 LSV and repair the seems..I reused everything, the center cushion is to far gone, but can wait till winter...
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
11-09-2014, 09:55 PM #155Member
- Join Date
- Sep 2010
- Location
- Camp on pool 8 of Allegheny River (Adrian, PA)
- Posts
- 64
Hello - I have been following your progress on this project - GREAT JOB.
Two questions: 1) What weight / thickness of Marine vinyl did you use? 2) Did you reuse foam padding? If not, what type (density) did you use?
I reviewed the link on the marine vinyl source but did not see any explanation of thickness / weight. Thank you!2003 Outback
Boat name = Lynn Syndrome
Its a condition that runs in the family...Judy Lynn (mother-in-law) Heather Lynn (wife) & Megan Lynn (daughter)...no known cure...but the boat helps
New boat for me on 10/9/10.
-
11-10-2014, 12:45 PM #156Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
http://www.garysupholstery.com/nauga...spiritmil.html (37.5oz)
When I checked around that's the heaviest and was most expensive. I reused the foam on the sides/backs, if you use a steamer the foam will expand to it's original shape. The seat foam may need to be replaced, you can try steaming those as well, on mine you could tell where people sat. Once you replace 1 or 2 cushions the rest will look different so you'll end up doing them all. For the seats cushions I used Firm.
http://www.rochfordsupply.com/shop/F...128/index.htmlhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
11-10-2014, 01:30 PM #157Member
- Join Date
- Sep 2010
- Location
- Camp on pool 8 of Allegheny River (Adrian, PA)
- Posts
- 64
Got the info- thanks. I'm only replacing the ski locker covers as the seams let go and they have several tears also. The rest of the interior is in average to above average shape. Again - nice work.
2003 Outback
Boat name = Lynn Syndrome
Its a condition that runs in the family...Judy Lynn (mother-in-law) Heather Lynn (wife) & Megan Lynn (daughter)...no known cure...but the boat helps
New boat for me on 10/9/10.
-
11-10-2014, 01:31 PM #158Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: 2002 LSV Re-upolhstery & Hydroturff
To make life easier you may want to replace it all with one color per cushion. Save a lot of time and money..
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
11-10-2014, 02:36 PM #159
I was kneeling on the sun deck as I covered the boat for the last time after winterizing and heard a loud "pop". Lifted the cover where my knee was and a nice big spider web crack in the vinyl. It wasn't even freezing yet. I guess I will be replacing sooner than later. Glad to have this thread.
2007 XLV Gravity Games
Full Wake Makers upgraded ballast and pumps
1,100 in each rear locker
1,180 in front
OJ 1435 prop, 325 EFI Indmar Assult.
Fresh Air Exhaust
SuckG8
Bunch of other crap
-
11-15-2014, 11:25 AM #160
Great effort! Where did you find matching vinyl?