Surf Tabs :)

[89PROSTAR]

I would use the actuator and build the "gate" same as the others have. Cut the plastic to the shape of the transom. You would have to get a hinge and attach to the transom and the "gate" figure out the ram distance and attach that. Sounds pretty straight forward. I just don't want to drill into my boat. You could fab up a mock transom and attach it with whole assembly and see if it works before drilling.

[wolff supra21v]

I am not a real fan of the gates I have surfed the Malibu and the Axis and Not a real fan of either one. Wake look good on both but I had to work to stay in the wake. I also surfed the 2014 supra SC, 2015 Mastercraft X-10 and a G21 did not have to put any effort into surfing the wave had push every where.

This is why I am thinking tabs and it looks like it would be simple. With my Supra 21V I thank anything would have to help.

[chadjitsu1]

Has anyone tried to buy the flow system? Will SC even sell it?

[jmvotto]

yes, call your dealer if it is available for your boat.

aws had it listed on their site, but now its gone from the cart side

http://www.activeh2o.com/wordpress/m...lsv-and-newer/

[sivs1]

I priced it out at the dealer, would be about $2k installed.

[mikenehrkorn]

I priced it out at the dealer, would be about $2k installed.

Probably depends on the boat and the dealer..........my dealer quoted me $1400 installed on my OBV.

[Birdman]

they have them for the OBV'S now! are you gonna get one?

[Birdman]

or two possibly

[chadjitsu1]

I priced it out at the dealer, would be about $2k installed.

You got a quote for the Swell for your OBV? It was 1400 installed?

[mikenehrkorn]

they have them for the OBV'S now!

You got a quote for the Swell for your OBV? It was 1400 installed?

My bad, I wasn't paying attention to the thread......that quote was for the Flow not tabs or the Swell.