Results 1 to 7 of 7
Thread: Wet SoundsWS-420sq wiring
-
08-13-2014, 12:48 AM #1
Wet SoundsWS-420sq wiring
My head unit has 3 outputs (front, rear, sub). Just bought the WS EQ unit and it has only one input. Does anybody know which output from the head unit I should be using? I have 4 amps. One for cabin speakers, two for tower speakers and one for sub. Thanks all.
2006 Outback V
1992 Ski Nautique Open Bow
-
08-13-2014, 12:57 AM #2
Front or rear outputs, just make sure its a full-range pair and the head-unit is either center/zero fade, or faded to which ever ones us used.
-
08-13-2014, 10:17 AM #3
Head unit is a pioneer deh6600. How do I know if it is full range?
2006 Outback V
1992 Ski Nautique Open Bow
-
08-13-2014, 10:30 AM #4
It's a DEH-X6600BS
2006 Outback V
1992 Ski Nautique Open Bow
-
08-13-2014, 11:51 AM #5
Some head-units, typically with those that do NOT have a dedicated sub output, have the ability designate the rear as either sub or rear full range. Others have adjustable cross-over filter adjustments. I would leave them off or full-range, whichever nomenclature the manufacturer uses.
-
08-13-2014, 12:17 PM #6
I'll try that in the next few days. Thanks.
2006 Outback V
1992 Ski Nautique Open Bow
-
08-16-2014, 03:51 PM #7
Got it all wired up MLA. Thanks for the info. It works great. I used the middle RCA pair. I think it's the rear.
2006 Outback V
1992 Ski Nautique Open Bow