Results 1 to 5 of 5
-
08-26-2007, 09:10 PM #1Senior Member
- Join Date
- Mar 2005
- Location
- NC
- Posts
- 115
where oh where is the transducer on the 05 LSV?
My depth finder has been goofing on me and i think that the transducer must have come loose in the boat. Anyone have an idea where they put the thing on the 05 LSV? any help would be great. Thanks
-
08-26-2007, 09:14 PM #2Senior Member
- Join Date
- Sep 2005
- Location
- Claytor Lake, VA
- Posts
- 600
Mines right next to the speedo paddle wheel.
-
08-26-2007, 09:45 PM #3Senior Member
- Join Date
- Mar 2005
- Location
- NC
- Posts
- 115
uggghhhh, thanks, I was hoping that I would have to take the floor out again. Can you access with the floor in?
-
08-27-2007, 04:00 PM #4Senior Member
- Join Date
- Sep 2005
- Location
- Claytor Lake, VA
- Posts
- 600
No need to remove the floor. Slide out the rear seat and lift the cover to access the v drive and bilge and look to the right of the v drive. On my 05 the transducer is mounted in a holder glued to the inside of the hull between the paddle wheel pick-up and the gas tank.
-
08-27-2007, 06:44 PM #5Senior Member
- Join Date
- Mar 2005
- Location
- NC
- Posts
- 115
thanks much..I am going to go check that out now. I am guessing that it must have come unglued when doing a double up. Thanks again
Similar Threads
-
Transom transducer install?
By moomba_armada in forum Sales & InformationReplies: 2Last Post: 01-01-2008, 07:46 PM