![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
Has anyone installed an IBS in a XLV?
There are partition walls for the under seat storage that seem to make it almost impossible. Anyone cut/modify the walls to fit the IBS? Will it fit/fill without modification?
I need more water ballast!
Thanks!
2018 Max with a little extra weight here and there
+1 on this thread. I am also interested.
2008 Mobius XLV - SOLD
I think IBS is a no go. The partition wall is glassed in and there is very little pass through room.
2018 Max with a little extra weight here and there
Well that sucks.
2008 Mobius XLV - SOLD
You could always add two 400s in the bow area under each seat.
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
I got the bags for this, but so far have not installed them. I just use a single bag on the seat, filled using a handheld Tsunami pump. I found that the 400's are a bit too big, and pose a risk of pressing too hard on the wrong spots, especially on the driver's side.
Of course, a buddy later remarked that I could have ordered custom bags. I never guessed!
So, if anyone wants to go in on a small group buy for custom XLV bags, please post here!
2005 XLV, upgraded ballast, Comptech swivel wakeboard and hydrofoil racks, Monster cargo bimini
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
2018 Max with a little extra weight here and there
So it's a no-go underneath due to the supports...
Time for more lead!
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...