![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
Hey guys, I have an 08 lsv and I have the raw water strainer. When I bought the boat new in 09, the strainer was clear and I could see what was going through it easily. 5 years later and it is real cloudy. I can see into it if I look closely but I would like it to be clear again.
What would you use to achieve this? I was thinking about CLR or something similar. Thoughts?
![]()
'08 Mobius LSV- SOLD!
2017 Mojo Pro
That or simple green,
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
Let it sit with a vinegar solution for a few hours and then brush out.
2018 Max with a little extra weight here and there
Thanks guys.
'08 Mobius LSV- SOLD!
2017 Mojo Pro
You could try a little oxy clean, the laundry detergent, in there with warm water for an hour or so too. I used to use that to clean our brewing equipment.
2011 Mobius LSV
Ron