Quote Originally Posted by jstenger View Post
The mounting block is held on by 4 bolts. The top 2 are thru bolted with nuts and washers. The bottom 2 are lag bolts since they are below the locker floor.
Quote Originally Posted by rbeckner27 View Post
Joe is right but there are 4 lag bolts on the bottom not just two
The blade is held in place by the big bottom pivot pin and the spring loaded pin. It is sandwiched between the mounting plate and the outer plate. There is a spacer plate on the interior side of the assembly to maintain the spacing created by the blade on the outer side which is held in place by the two bolts on the interior side.
Thanks. That's exactly the type of info I was interested in.