Here you go:

https://forum.moomba.com/album.php?albumid=320


Quote Originally Posted by gurt View Post
Hi, after reading your posts, I think I found the solution that I will use. First I will drain (block, manifold, etc) and then fill with antifreeze with this method :

I will put a tubular system into the exhaust so I can have all the antifreeze into a bucket wich is pumped back to the "main" antifreeze bucket. The "main" antifreeze bucket is connected to the boat via a fake-a-lake.
In this way, I don't loose liquid on the ground, I make a antifreeze loop so the boat can run idle for the necessary period. I also plan to use the same antifreeze solution for more than one winter. In my case the antifreeze will be an glycolic pink that need to be diluated (depending on the antifreeze level you need but around 50%). I think (and hope) it is a good solution, I just need to buy a pump