Quote Originally Posted by toksik View Post
I will pick up the ethanol treatment and install the fuel/water separator. I'm not sure why my boat does not have one, but the in-line one is not sufficient in my opinion.

Thanks for the re-post!
I was having a problem with mine not starting this weekend (started up and sputtered for a bit then died, then it only cranks and cranks but doesn't catch), same thing happened last year about this time. Last year turned out to be the MAP sensor, so I unscrewed it from the top of the intake manifold, pulled it off, it started right up. I gave it a couple of hours, reinstalled it and it fired up, go figure. I'm going to buy an extra sensor and keep it in the boat in case it happens again.