Results 1 to 10 of 23
-
06-10-2013, 11:31 AM #1
Springy swivel pin thingies for the swim platform
Anyone know whur to get um?
My neighbor wanted to "help" and bent one and didn't install the others one correctly and now its at the bottom of the Columbia river.
I know you can get the cheap ones at a hardware store but I'd like to get the OEM ones.
Thx...
PWI as usual...
-
06-10-2013, 12:30 PM #2Senior Member
- Join Date
- Jan 2008
- Location
- Pensacola, FL
- Posts
- 1,585
OEM you'll probably have to order from a dealer.
Hardware stores have ones, but they usually rust.
West Marine and those type stores usually carry some similar to OEM and are more rust resistant.1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier
-
06-10-2013, 12:38 PM #3
hardware stores carry stainless versions of the pins. I have found they last a few seasons. under $2 each so a small cost. I liked the swivel ones that the dealers carry but my dealer quoted me $5 each. too much to spend to worry about losing again.
'06 Supra Launch 20SSV-gone but never forgotten
-
06-10-2013, 12:40 PM #4
try McMaster carr for the stainless
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
06-10-2013, 01:39 PM #5
Re: Springy swivel pin thingies for the swim platform
Kinda what I figured. Hoping to find the OEM parts somewhere other than my dealer.
PWI as usual...
-
06-10-2013, 02:01 PM #6
Re: Springy swivel pin thingies for the swim platform
Ouch! They're proud of those little buggers... I like the idea of having a short lanyard.
http://www.thefind.com/sports/info-s...ded-clevis-pin
PWI as usual...
-
06-10-2013, 02:44 PM #7
Go to Ace hardware, Lowes, etc... they have them...
-
06-10-2013, 02:49 PM #8Banned
- Join Date
- Oct 2005
- Location
- Durham, NC
- Posts
- 649
You guys trip me out sometimes. Have $40,000 plus boats with $5,000 stereos and whine about a 5 dollar part!
-
06-10-2013, 03:07 PM #9
Call Tacoma Screw and they may have some fancy do-hickies. I'd recommend getting the real name for the do-hickies before you call.
1998 Mobius
310 HP PCM
SOLD
-
06-10-2013, 03:11 PM #10
Had to replace 1 this weekend. Part was only $2 from Moomba/Supra Slalom shop. In the meantime til I got the part I used 2 zipties
2009 LSV Liquid Force Edition
- Gravity III - Upgraded 900lb rear locker
- Z5 Rack
- ACME 1847
- Polk MM6501UM - Kicker IX500.4
- Kicker CompVX 12" - Kicker IX1000.1
- Pair Wetsounds Rev 10s - JL Audio HD750/1
- RGB LEDs