Results 1 to 5 of 5
Thread: Some help please
-
06-01-2013, 03:45 PM #1
Some help please
We were running our boat, I shut it off for someone to get in the water. Tried to start the boat and it just clicks. We recently replaced gasket on thermostat and a hole (custom cut gasket) was not cut. Seems like battery has enough power. Replaced gasket with properly cut holes and it still won't start. Thinking we overheated it? Any other thoughts?
-Ryan
twitter.com/WakeVideos
2000 Mobius V
Monster Tower MT2 - 750 rears, GG 1180 center - PP Wakeboard Edition
-
06-01-2013, 04:27 PM #2
After waiting over an hour the boat started fine, a little nervous to take it out and get stranded again.
-Ryan
twitter.com/WakeVideos
2000 Mobius V
Monster Tower MT2 - 750 rears, GG 1180 center - PP Wakeboard Edition
-
06-01-2013, 04:40 PM #3
Sounds like vapor lock, pour cold water on fuel pump, try not to get wires soaked.
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
06-02-2013, 09:02 AM #4Member
- Join Date
- Jul 2011
- Posts
- 76
The gasket that was wrong basically prevent any flow of water outside of the thermometer. Is there some kind of safety cutoff or something that detected that no water was flowing? I don't think the temperature got above 140. We replaced the gasket once we got our tow back to the dock, but the boat refused to start for about an hour. Since then, we haven't had a problem.
2000 Mobius V
-
06-02-2013, 12:17 PM #5
Where's the click coming from? You could have a bad starter solenoid.
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...