Quote Originally Posted by MLA View Post
From Exile's website, I was able to gather his amp's total fusing.
800.1 = 60A (2 x 30) I would use a 50 or 60 amp
Harpoon = 80A (2 x 40) I would use a 80A
SM600.1 = 50A (2 x 25) I would use a 40 or 50 amp

For the main circuit protection, I would use a 120A or 150A breaker or fuse. As noted, the amp's estimated current draw will depend on some variable factors such as battery level, volume and music type, but it also depends on how many chnls are running at 4 ohm and how many or running at 2 ohm. The load on the chnl dictates the amps output, thus the current draw.
MLA thanks for the input i was going to use 125 across the board

here are two more amps
Xi2500.1
Xi1500.1
into 1 ohm
2500W x 1
1500W x 1
Reccomended Fuse Size
200A
100A
Power / Ground Wire Size
1/0 Gauge
4 Gauge