![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
I saw Harmsway's post about some custom switch covers that looked awesome by the guys at OTRATTW.
- Are my switches below the right ones? Sorry for the poor cell phone pic!
- If so, any suggestions on the PerfectPass switch?
- And do I just yank the covers off? or what is the correct way to remove the switch cover?
Thanks for any help, Eric.
Yes, it looks like your switches are the right ones. I think, though, that otrattw only etches black switches, so your new switches would be black.
On the Perfectpass switch maybe the switch for "cruise"? I'll try to find one in a bit.
The covers pop off if you work them carefully with a small slotted screwdriver. If you want to wait, though, otrattw sends you a special little plastic removal tool.
There's also this thread for more discussion on this...
https://forum.moomba.com/showthread....light=contoura
===================================
2005 Moomba Mobius LSV
OK, here is a cruise control icon, in this document, page 38, top left. You can have them put that icon and the words "PERFECT PASS" if you want.
http://www.carlingtech.com/sites/def...s-Markings.pdf
===================================
2005 Moomba Mobius LSV
Dhyams, thanks. I was just posting these better pics when I saw your responses!!
Thanks again, Eric.
Switches (3).jpgSwitches (1).jpg
Good deal...note that otrattw's switches will also not have the red lenses. See this thread for pics of what they will look like:
https://forum.moomba.com/showthread....light=contoura
In case it will help you out, this is exactly what I sent to otrattw (formatting is a little messed up, but you get the gist):
================================================== ========
I'd like to order these, all Contoura V rocker switch covers, no indicator bars except as noted.
WORD IMAGE NOTES
================================================== ===========
NAV/ANC D2
BILGE AJ
BLOWER AF
STEREO 2F
AMP speaker icon from here: http://www.otrattw.com/proddetail.php?prod=VVPZC2G-500
LIGHTS AC indicator bar on top and bottom
ACC A5 indicator bar on top and bottom
I got the picture codes from this document: http://www.carlingtech.com/sites/def...s-Markings.pdf
Last edited by dhyams; 11-06-2012 at 09:20 AM.
===================================
2005 Moomba Mobius LSV