Results 11 to 15 of 15
Thread: Bow stop/front roller
-
05-11-2010, 08:04 PM #11
sorry about that, really thought it was the larger size
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
05-11-2010, 08:21 PM #12
i used the 3" poly on mine. it does measure slightly big than three inches thoough
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
05-12-2010, 02:41 PM #13
Also remember another thing, make sure to not tighten the through bolt so much that it can't roll! The factory black plastic junk was so tight it could roll if it wanted to. You don't want it loose but loose enough that the boats weight will make it roll. I have mine so that a firm grip will turn it.
2007 Mobius LSV
-
05-12-2010, 02:53 PM #14
Man, it's like you guys can read minds sometimes! I was just going to ask the same question about what size of Stoltz bow roller to get. I am not around my boat, so needed some input. I've got a similar roller setup to the Stoltz, and it looks to be very similar material, but it is marking my boat a little, and looks like it needs to be replaced. I'll feel better if it is anyway...
So, 3 inch it is! Thanks guys!!2015 Supra SC400
08 LSV - Sold
Go big, or go home.
-
07-31-2012, 08:13 PM #15