Quote Originally Posted by jsmith227 View Post
Hey there,
Great stuff. I just bought a '08 LSV and I'm looking at installing the Blue Sea Add-A-Battery kit. Did you cut the existing 2/0 cables coming from the motor and install a 5/16" connector or totally run new cable using the welding leads? Also, when you mention the dist blocks were you using bus blocks for this?

I know this is an older thread, but hopefully you see it. Thanks again for all the good information and very nice work.
Sorry, just saw this. I used the existing 2/0 cable and just cut the battery terminal lugs off and crimped on the appropriate size ring terminals. As far as the "dist block" reference in the diagram, I was referring to the existing bus bar under the dash.

Hope that helps.