Results 21 to 27 of 27
-
06-05-2012, 01:12 PM #212014 Mojo Surf
2013 Mojo Sold
2010 LSV Sold
2002 OB LSV Sold
-
06-06-2012, 09:39 PM #2209 21v LAUNCH
99 Outback LS. Sold
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
Doug
-
06-07-2012, 12:56 AM #23
I'll definitely look into it when I get on the water. I think it was a little dirty when it went in but mostly the dealer not cleaning up after themselves.
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
05-19-2013, 10:20 AM #24
Where is your dripless Shaft Seal cooling water T'd in?
I just changed my 08 lsv dripless feed from the factory designed hot water supply on the exhaust manifold to a cool water supply, like others have shown it done on newer models.
My oil cooler also has a drain on the bottom (like most do, I'm sure), so I plumbed the line to that. I could not find the exact barbed fitting that I needed in the little town I live in, but I did find that a npt air valve fitting fits perfectly. I removed the valve insert to allow the water to flow freely. The nice thing about the npt air valve is that it is small, so it allows the supply line to clear the alternator, which might not have worked with the normal barbed fitting I had in mind for the job.
I had to crank down on the hose clamp to ensure that the supply line would seal well on the short npt valve, but it worked out fine.
Once I had the correct parts, the job itself took all of 15 mins or so.'08 Mobius LSV- SOLD!
2017 Mojo Pro
-
05-20-2013, 02:11 PM #25
Hmm, this thread has me thinking about doing what you just talked about Highrider. Might not be a bad move to change the location of the water pickup from where it's located now (factory location).
I don't have any issues currently with leaking or anything, so I'm not sure if I should mess with it... but I do like the idea of cool water running in the dripless seal versus hot manifold water.2015 Supra SC400
08 LSV - Sold
Go big, or go home.
-
05-20-2013, 02:21 PM #26
Where is your dripless Shaft Seal cooling water T'd in?
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
05-20-2013, 05:02 PM #27
Where is your dripless Shaft Seal cooling water T'd in?
I didn't take any photos but I can the next time I pull the cover off. Maybe this weekend?
'08 Mobius LSV- SOLD!
2017 Mojo Pro