Results 21 to 27 of 27
Thread: Tower Camera Mod
-
02-16-2012, 01:04 PM #21-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
-
02-16-2012, 01:15 PM #22
Haven't read too much into all of this, but thought I'd throw out there what I have seen. I will have to check what brand, but my riding partner bought a camera mount thing where it 'followed' the rope and it was a piece of crap. Interfered with the rope quite a bit and was a big PITA. Now we just use our iPhones to capture the video and the quality is pretty great if you are just trying to evaluate and see what you are doing wrong.
-Ryan
twitter.com/WakeVideos
2000 Mobius V
Monster Tower MT2 - 750 rears, GG 1180 center - PP Wakeboard Edition
-
02-16-2012, 01:29 PM #23
-
02-16-2012, 02:45 PM #24
So the guy I know that bought wakejak said this:
no it didnt mess with the rope, but it tended to try to twist on me
that wear on the rope would happen for any slip knotter
which is common
i do not slip knot
and that problem can easily be solved by adding a short "slip" to the front of the rope with expendable cheap rope
not really a problem
the main issues IMO were the fact that my tower is F'ing huge and it's nearly impossible to get up there to get the camera. as well as the mount had a tendency to slip back and forth, could easily be fixed by double sided weather stripping between the mount and the tower tow point
IMO just way more trouble than it was worth and i knew i wouldn't use it
but if someone really wanted the video.. it IS worth it and it would work just fine
So disregard my last post, I was misinformed!-Ryan
twitter.com/WakeVideos
2000 Mobius V
Monster Tower MT2 - 750 rears, GG 1180 center - PP Wakeboard Edition
-
03-02-2012, 05:38 PM #25
The only problem I see is this. If the PVC inside diameter is close in size to the outside diameter of the pilon, then there will not be enough room to get the PVC over the rope and the pilon. You need to cut a slot underneath the tube which holds the rope. Or you could use a large size PVC for the center section, and smaller sizes for the top and bottom. You would then slide the assembly over the pilon as one.
Joe
2014 LSV
2010 Outback V - Sold
1993 Echelon
-
03-02-2012, 07:28 PM #26
I bought of of these recently to give it a shot. It has a quick release bogen camera mount. it hasn't been mounted or tried yet.
It is called a Trakker. There is some video example on youtube and his website.
TopMountL.jpgKraig - 2010 Outback V
-
03-03-2012, 07:36 AM #27David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD