Results 11 to 20 of 26
Thread: DIY: Tower Pad Swap Out
-
08-25-2011, 10:47 PM #11
nice work mmobius i have been reading this as your been posting and had to keep refreshing to make sure you were done before i posted LOL. I like this idea and i will be doing it soon as my port side pad is walking out again.
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
08-25-2011, 11:31 PM #12
Good Job! Thanks for the DIY. I don't need to replace mine yet, but I am glad to know where to look for info when i do.
------Sold-------
2008 MOBIUS LSV - Acme 1847, GIII w/1100lbs Vdrive, IBS, PPSG, Wake plate, Z-5, Kenwood 700U, Kenwood Kca-RC107MR , Exile SXT65, Kicker 700.5, Kicker 350.4, Polk MM651, JL 13.5 Thin-Line Sub.
-
08-26-2011, 01:45 PM #13
I was told by a someone that a lot of manufacturers are not even using the pads anymore?
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
05-09-2012, 10:24 PM #14
Thanks!
Mmobius thanks for writing this up. Just did it the other night and it was very quick/easy to do thanks to your information.
Much appreciated!2008 Mobius LSV
-
07-10-2012, 03:47 PM #152004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
07-12-2012, 02:55 PM #16
Can this also be used on the XLV? I need to replace my pads and do not want to wait on ordering if I can just go to Wal-Mart!!! Please let me know if anyone has used these on an XLV
2008 Mobius XLV, Z5 Rack, RockFord Fosgate Amps and 12" Rockford sub, DBoot5 8" & 6" Tower speakers, Kicker Amp and 6.5" interior speakers, Inland Surf, Hyperlite, Liquid Force, Aerial Swing Away Racks, Perfect Pass StarGazer, ACME 1235 and Evolution Cover.
-
07-12-2012, 05:35 PM #17
I have not needed to swap out the pads but I see no reason why it would not work.
I do have the same pads on the top surface of the boat to give people a target to hit with their feet when boarding the boat.ImageUploadedByTapatalk1342128884.995260.jpg2018 Max with a little extra weight here and there
-
07-17-2012, 10:17 AM #18Senior Member
- Join Date
- Oct 2009
- Posts
- 102
Good write up on the process however I posted those extact same traction pads a year or so ago & they lasted about 6 months before they started to "walk-out" like the OEM pads did. Hope yours last longer than mine.
-
07-30-2012, 05:05 PM #19
Thanks for the write up on this one! I noticed ours are starting to walk out on our 2010. Probably something I will tackle in the off season. I appreciate the images and the step by step.
Derek & Poppy
2010 Mobius LSV Sandrock/Fossil
Gravity III ballast, wake plate, Z5, LEDs from Oznium (cup holders, helm, transom)
Exile SX65M Cabin Speakers w/ Exile XM 15.4
Exile SXT9Q Tower Speakers w/ Exile XM 30.2
Exile 12" sub w/ XM12.1
Exile ZLD MKII
-
05-27-2013, 10:13 AM #20