Results 11 to 12 of 12
Thread: water in v-drive
-
05-30-2011, 09:32 PM #11Junior Member
- Join Date
- May 2011
- Posts
- 6
it turned out to be those compression fittings after all. I used some epoxy to seal the water reservoir from the fittings themselves. Just for a temporary fix until i can get some parts. but it worked just fine, for now. I also used some liquid casket maker to seal the dipstick hole. I put her in the water and put the engine under some pretty typical conditions and pulled a wakeboarder around for a good hour. the oil was not milky at all and the vitals are flawless. thank you again.
-
05-30-2011, 10:11 PM #1209 21v LAUNCH
99 Outback LS. Sold
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
Doug