so this last time i was out i noticed about all of the wood screw bolts that hold the bunks on the trailer are about half way out. When I tried to tighten them back in they just spun and would not bite, rotten wood im guessing.

Then when loading the boat back on the trailer i had to give it a little juice since the ramp is so slick i cant back the truck tires below the water line. This ripped out the staples on the back of one of the bunks. I bought some liquid rollers yesterday and plan on replacing and re-carpeting all the bunks as soon as i get home from work in two weeks.

What kind of wood or material do yall recommend for this? I was thinking pressure treated boards at home depot using bolts and nuts to secure the new bunks instead of those cheap screws. i figure if i put a bolt in from the top even if the nut falls off the bolt will prevent the bunk from sliding off the trailer.