Perfect Pass Cruise Install

[PatL]

I have attached a couple pics of the major components for the Perfect Pass Simple Cruise installation kit. They are arranged from left to right generally in order of installation. Almost all of this is plug and play which surprised me. The only somewhat difficult part is going to be attaching the servo motor to the throttle linkage. Even so it looks fairly straightforward. One thing I would add is that is does not appear that very much of this kit or the additional components to go to Stargazer is specific to a Moomba. One exception might be the attachment to the linkage.

From left to right the components are: Servo Motor which controls throttle linkage, servo motor wiring harness which attaches to master module tucked under driver's side dash, rpm wiring harness which goes from master module to tach, power harness which goes from master module to power source (I plan to run mine off the back of the speedo), and the 2 inch dash control switch.

The first 2 items on the left remain if going to the Stargazer upgrade so it literally is plug and play for the upgrade. I will document the installation process so it's available to anyone who is looking to upgrade a late Model Moomba to include Perfect Pass Simple Cruise. I will likely go the rest of the way to Stargazer in the coming months as well.