Heater Group Buy #2

[j4rowell]

Saw the link on the MC forum. Sent you an email matt. Count me in on the 4 vent one.

Joe

[Matt Glenn]

Orders are going in Next week ( After 12pm on MON) for those that have not contacted me and Want to Buy one of the 3 vent or 4 vent heaters please call Danny at Heatercraft 208-687-4400 Ext 224 and tell him you are with the MOOMBA GROUP and he will take your order

[lsvboombox]

I've read a ton of heater install threads on our MC forum. Overwhelmingly, everyone suggests purchasing the Y-pipe which brings the return line to the raw water intake rather than the circulating pump...this setup will provide significantly more heat at idle. Heater Craft sells the Y-pipe for $40 and SKIDIM for $34.

Matt: I wonder if HeaterCraft will also give us a group discount on this part? Please let us know...tks, mac

http://www.heatercraft.com/ProductIn...productid=H424

http://www.skidim.com/prodinfo.asp?number=H424

I have one that i didnt use. I just used the MC Valves on the block.. If anyone wants the y valve let me know I will save you a little coin.... The issue would only arise at idle and it seems from the people here they dont have any problems.....

[walb0244]

Anybody else think that $40 for a brass y pipe is alittle much?

[lsvboombox]

Anybody else think that $40 for a brass y pipe is alittle much?

yes but if you are idling a lot the water pump is pulling water thru the heating system... So if you have problems with your 400 heating system at idle then whats another 40....

[Matt Glenn]

1st day of group buy and we have ten people and I know there is more to call Danny. So for all those on the fence you get the best price at this point no matter what. You have intill Thur this week to jump on board. For those that wanted the Y bras fitting to increase heat output at idle I got the price down to $28. Call Danny at Heater Craft at Ext 224. His number is in prior post or just look up number on web. He will be in office from 8am-4pm PST.

[Getssum96]

Got my order in this morning, thanks for all your hard work!

Anyone have any idea how to hook this up on one of those nasty Mercruisers?

Thanks!

[gus 08 mobius lsv]

ordered my heater today thanks for all the work putting the group buy together matt... glad i didn't buy this last year cause it really saved me some money!

[walb0244]

Just ordered my heater. Glad we got so many people already so I don't have to worry about the price going up because some people backed out. Also, ordered the Y fittings. Thanks again for putting this all together.

[Matt Glenn]

There is still more time to get this great price. You have until This Thur To call Danny at Heater Craft to Order Your Heater. We have 19 and counting so far that have got this great deal guys. Contact and info in prior post.