Heater Group Buy #2

**Matt Glenn** · 01-31-2011, 08:14 PM

I dont know any complete heater systems on line that have 2 pull out tubes and 1 fixed. These are $460. If you know what you are doing then Buy all means try to find a better deal. Others have posted this to me but all vents are fixed and not same btu of power. We are a good to go on this with 12 people, so if you dont want one from the fact. no big man

**Matt Glenn** · 01-31-2011, 10:50 PM

If you are not in yet please send me your email if you want in Order might be going down next week.

**jmvotto** · 02-01-2011, 11:26 AM

Originally Posted by jmvotto

anyone DIY these in a 06 to 08 OBV or a pre 06 lsv.? the space looks really tight.....

bump, anyone do this to the smaller boats

**mcdye** · 02-01-2011, 02:35 PM

My '02 OB LSV, a 3 port heater. 2 Hot Tubes and 1 euro. It was mounted on the hump.

**Matt Glenn** · 02-02-2011, 08:24 PM

If any one is interested in group you need to make up your mind now. It is going down next week ( Mon the FEb 7th)

If you are in please send me your name and cell number to [email protected]. For those that are in and have not contacted me v email that next week is good please do ASAP.

Pricing and info is list in above post

**jmvotto** · 02-02-2011, 10:27 PM

Originally Posted by mcdye

My '02 OB LSV, a 3 port heater. 2 Hot Tubes and 1 euro. It was mounted on the hump.

Did you install it or did the dealer?

**wolfeman131** · 02-02-2011, 10:34 PM

JV - don't know if this will help you, or not, but I have a 2011 Moomba catalog on my desk and it shows under "Miscellaneous Options" that a "Heater w/ Two Nozzles" is an available option on both the Outback and the Outback V.

**mcdye** · 02-02-2011, 10:49 PM

Originally Posted by jmvotto

Did you install it or did the dealer?

According to the previous owner, it was factory installed. It was a loaded rig including shower.

**jmvotto** · 02-02-2011, 11:05 PM

Drew & Mcdye. Thanks for the input. I know it will fit but not sure if I can wiggle myself over the sub hump or under the bow cushion to install this luxury item...

**macattack** · 02-04-2011, 09:31 AM

I've read a ton of heater install threads on our MC forum. Overwhelmingly, everyone suggests purchasing the Y-pipe which brings the return line to the raw water intake rather than the circulating pump...this setup will provide significantly more heat at idle. Heater Craft sells the Y-pipe for $40 and SKIDIM for $34.

Matt: I wonder if HeaterCraft will also give us a group discount on this part? Please let us know...tks, mac

http://www.heatercraft.com/ProductIn...productid=H424

http://www.skidim.com/prodinfo.asp?number=H424

Thread: Heater Group Buy #2

Thread Tools

Display

Ordering Soon

Group Buy is Going Down Next Week

Posting Permissions