Quote Originally Posted by lewisb13 View Post
So crazy I was JUST typing out a new post asking if you could use a multimeter to match the output voltage at each channel with the output voltage preout(s).
Brad,

If you are going to do this, please read "The Nine-Step Procedure" on pg 14 of the manual in the link below. Unless you own this amp, you'll need to calculate your target voltage based on the formula in my first post.

http://marine.jlaudio.com/pdfs/M-08/M6600.pdf

And here is the link to the CD with the test tones:

http://www.shopatron.com/products/pr...1.1.0.0.0.0.0?

Al