![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
So this new 6 channel amp I bought has 6 RCA inputs and my HU only 1 SET of RCA out. Do I need to get a new head unit with 3 SETS of RCA out or can I just hook the one SET of RCA out to channel 1 and 2 on the amp and itll split it into 6? Just trying to power the cabin speakers here...
2013 LSV
2005 LSV - SOLD
Which amp did you get? Most multichannel amps can be run off a single set of inputs.
MB Quart NAU660. Let me take some pictures real quick...
2013 LSV
2005 LSV - SOLD
2013 LSV
2005 LSV - SOLD
From what i just read on the MB Quart site it doesn't look like it. You'd have to call them to verify but it looks like you'll need all inputs connected.
2007 Mobius LSV
Lewis -
3 sets if pre outs is a great thing to have from TR head unit but it doesn't mean you HaVE to have them. Yes you van use splitters and yes many amplifiers can run off a single pair of inputs and the rest configures with a switch. Check your amp owners manual for details.
It would be preferable to do the switching at the amp instead of with cables.
-Brian
Exile audio
Yeah this instruction manual is pretty much the most vague thing I have ever seen. Unreal.
2013 LSV
2005 LSV - SOLD
Maybe they designed the owners manual in Germany to.... Haha!
Ok that's bad. Sorry.
Just use some jumpers an call it good.
From the photo doesn't the 'Mode' switch allow you to drive all six channels with a choice of six, four or two RCA inputs?
Even with one pair of RCAs and in the 2-channel mode you should be able to adjust the gains on all six channels in independent pairs.
David
Earmark Marine