Ordered a set of the 910's from Wakemakers. One day they were in stock, then not, so I asked how long before they are back, I was told 4-6 weeks! Browsing again the next day and they appeared to be in stock, so I chatted with the online sales rep and they had four available, so I bought two. So we'll see if they actually ship. I've read a few threads here where people struggled to get bags shipped.

Anyway, instead of ordering their kit, it seems cheaper to order 8 fittings and two bags. Worst case it's $420 (bags) and $40 (fittings). The kit is $560. I asked the online sales rep which fittings I needed and he said he couldn't share that information with me and that I should buy the kit. WTF?

Best I can tell, each bag has four (4) ports. For my Mondo, I have a supply and an overflow hose for each side. Both hoses use the Flow-Rite fittings. Looks to me like these Wakemaker male fittings would do the job.

https://www.wakemakers.com/wakemaker...g-fitting.html

Unless, the factory Flow-Rite fittings are 3/4", in which case I need these:
https://www.wakemakers.com/dry-lok-1...g-fitting.html

I measured the factory male port. The ID hole of the fitting is 3/4" but not sure how these are measured.

Anyone know which fitting I need?