Hi all!

Bought our Mojo 2.5 a few months ago and things had been running smoothly until this last weekend. Boat always cranked and started immediately with no noticeable issues, until Saturday. Turning the ignition switch to on will still turn on all accessories and you can hear the fuel pump priming, but when you go to start literally nothing happens.

Things I've checked:
Batteries are still working fine. (I think)
Ignition circuit breaker behind the dash isn't blown.
The safety lanyard is installed correctly.
Wiggling the throttle doesn't appear to do anything, so hopefully it's not the neutral safety switch.

Does anyone have any troubleshooting steps for dummies I can attempt before I get in the long waiting line at a local shop to get it looked at? I don't think I'll be able to hotwire the boat to check the ignition switch as it has a single plug that plugs in to the back of the switch with no open wires to cross. I've got a multimeter, minimal experience working on anything more complicated than a motorcycle, and a lot of free time. So hopefully I can figure this out.

Thanks in advance!
Linus