Quote Originally Posted by flienlow View Post
Well shit I really screwed up tonight. Wakewakers sold me 1 1/8" hoses and coupling to connect to the 2 bags together and 4- 1 1/8" "T" fittings and 2- 1 1/8" "Y" fittings just because.

What I didn't notice is that the current outflow is only 1" and I cut it! In short now I need a 1"X 1 1/8 X 1" T connector to link the 2 different size tubings together. But flow-rite does not make them. Ideas?
Just use a blow dryer (put it right on the grate practically for 30-60 seconds) to heat up the 1” stuff (wear gloves). I was soooooo naive going in that I didn’t know 1 1/8” hose existed as wakemakers was sold out. So basically I have 1” tubing on all my 1 1/8” quick connects and flow rites. Huge pain in the ass and a bitch to get them on but doable.

Didn’t find that out until I added the connections between bags a month later. Went on line to order and there was magically 1 1/8” hose available. Cursed that wakemakers salesman to hell. It all worked out, but probably took an additional 3 hours and using a blow dryer in a ballast compartment in August in Texas inside a marina dry shed was miserable. Honestly, never had I sweated so much in my life. Looking back, maybe wasn’t that safe to do alone.


Sent from my iPhone using Tapatalk