For some reason, Skier's Choice decided to make these rear bulkheads in the lockers that are almost a foot from the transom, and mostly empty space. On the port side is the ballast pump panel, and on the starboard side, there was nothing behind there until I put my tab relay panel there.

I needed to put an access port in the starboard panel to be able to easily change fuses if needed, so I figured while I had it out I'd cut it down to gain some space back.

It turned out pretty good, I got 5" of space, and the benefit of moving the ballast further aft and the ability to fill the bag more fully, since less of it is stuffed under the seat - which got me extra storage space under the seat. Win win win!

Now on to the port side...

Port side, giant space behind the panel.

Starboard side, fixed!


Access port installed. I need to shorten my ballast fill/drain hose now.