Moomba Helix Surf Wake not Good Enough

[MoomHeli]

Earlier this year we bought a 2017 Moomba Helix. We could never get a good enough wake so we upgraded our ballast bags. We have 1200 in both sides and in a 700 in the front. We fill the backs all the way and the front to around 60. The swim platform is about 3 inches under water. Wake plate at 50-100 and flow around 80. We do this for port side and starboard surfing. We still cannot get a good enough wake to surf without the rope. The wave is only 6-8 feet long at you have to get close to the boat to get any push. Even when emptying the opposite side out. Any suggestions on what settings we should use. Also we may try piggybacking a 700 pound bag on each side along with the 1200s. Is this too much or is it okay?


Sent from my iPhone using Tapatalk