Did some more LED upgrades. I figure I'd put all my LED stuff into a thread to have it in one place.

I have most of my LED's on the "court light" circuit, controlled by the rocker switch. I have the following:

  • Translucent cupholders with blue LED's built into the barrel
  • LED Angel Eyes on the inside of the REV410 grills
  • LED Angel Eyes on the inside of the grills of all my Polk 6.5" coaxial in boat speakers
  • Clear plexiglass rings with narrow 1cm per led strips hot glued on the inside of the rings
  • Narrow 1cm per led strips inside translucent tubing as LED subwoofer rings
  • LED Angel Eyes on the inside of the subwoofer grills
  • LED surface mount trailer running lights in the rear lockers
  • LED Surface Mount running lights in various spots on the seat bases
  • White LED bulbs in the various dash gauges
  • LED replacement front Nav light
  • LED Bulb in the tower mounted anchor light
  • Six waterproof 6w CREE LED lights mounted to the wake plate.
  • 20w LED drain plug light
  • MR-16 LED docking lights


My most recent addition was finishing up the bow with the angel eyes, speaker rings, and cupholders. Because I do a decent amount of motoring at night, I wired them onto a seperate switch that piggybacks off the court light switch. That way I can leave the lights rear of the driver on if I want and black out the bow lights.

Likewise, I added an independent switch to turn on and off the underwater transom lights.

Two new switches:

Switches light up blue when the lights they control are powered on.

Clean and flush mounted.


Bow speaker lights and speaker rings and cupholder.