Kicker 8" tower mounting

[wiegs1]

I purchased kicker 8" speakers but im not thrilled about the clamps. They don't rotate much and the tubing on our tower is not perfectly round because it bends. I want to move as far to the outside as possible to save head room. Suggestions?

[MLA]

As far as the oval tubing at the bends, try to mix and match on the size inserts to get a pair that fits but is tight. As to the clamps, yes, you get about 10* of slot to orient the pod to accommodate for the tower angle. Sadly, this is when a swivel clamp like the Wet Sounds Icon-8 TC3-S may be the better option. . I know, you already have the KM8 and KMTES8 pods, just being real.

I cant give names, but there is a pod out there that has multiple clamp mounting hole to allow the pod to be oriented about every 15*. The come in a cheap polished finish that will not last, so consider powder coating them. Also, you will likely need to enlarge the speaker opening and its not fun.

[Stazi]

Starts with a K as well, right Mike?


Sent from my iPhone using Tapatalk

[deckwork]

I went with Kicker aswell pair if 8 and pair of 6.5 in the cans i believe have been mentioned the 8s i did not use clamp just bolted in factory holes. I did have to trim the opening a bit took about 5 min with grinder cant comment on finish yet as they are only couple weeks old but got the covers for towing and boat is stored inside so dont think i will have a problem. Definitely sound and look better than factory.

Sent from my SM-G935W8 using Tapatalk

[Stazi]

Hmm. Never thought of trying to mount directly like that. Mine are with clamps.


Sent from my iPhone using Tapatalk