2015 Mojo

[SorryCharlie]

Can someone tell me what exactly is standard on the Surf Edition?
As I understand I have:
650lb left/right rear sacs
700lb bow sac
500lb additional u-sac in the bow

is the bow sac that is 700lbs a hard tank in the bow? I've searched and can't find much info.

[JoelFett]

It's a fly high bow sack under the front cushions.

Sent from my SM-G930V using Tapatalk

[SorryCharlie]

I know there is a u-sac under the front cushions but standard is 2K lbs, and the surf edition gets an additional 500lbs.

Rear locker right - 650lb
Rear locker left - 650lb
Bow - 700lb
______________________________
2000lbs standard ballast

Surf edition adds 500lb u-sac, which I'm guessing is the one under the bow cushions, where is the other 700lb bow sac? Or does that u-sac in the bow now weigh 1200lbs?

[hawgtitan]

The 700 lb. is hard tank in the floor that fills then when full it pushes overflow to the bow sac.


Sent from my iPhone using Tapatalk

[07STI]

The 700 lb. is hard tank in the floor that fills then when full it pushes overflow to the bow sac.


Sent from my iPhone using Tapatalk

This. The 700# hard tank is also referred to as the center tank. It's under the floor to the left of the driver's seat. You can see it if you open the access panel there.

Edit - At least that's how the setup is on the Craz. I assume it's the same for a '15 Mojo.

[SorryCharlie]

This. The 700# hard tank is also referred to as the center tank. It's under the floor to the left of the driver's seat. You can see it if you open the access panel there.

Edit - At least that's how the setup is on the Craz. I assume it's the same for a '15 Mojo.

Thanks, I'll have to take a look at that tonight. Makes sense because the bow sac takes forever to fillup.

[SorryCharlie]

Anybody have pump recommendation to speed up the process of filling the sacs?

[Stazi]

This. The 700# hard tank is also referred to as the center tank. It's under the floor to the left of the driver's seat. You can see it if you open the access panel there.

Edit - At least that's how the setup is on the Craz. I assume it's the same for a '15 Mojo.

What he said


Sent from my iPhone using Tapatalk

[Stazi]

Anybody have pump recommendation to speed up the process of filling the sacs?

You could potentially add a quick disconnect to the front of the v sac and pump it with a Tsunami pump.


Sent from my iPhone using Tapatalk

[sivs1]

Anybody have pump recommendation to speed up the process of filling the sacs?

How long does it take now?