Results 1 to 5 of 5
-
05-11-2017, 11:58 PM #1
Junior Member
- Join Date
- Jun 2015
- Location
- Fargo
- Posts
- 29
Adding dual battery - how to ground?
I am planning on adding another battery so I have a dual battery setup, to handle a stereo upgrade. I think I have most of it figured out, but not sure how or where to ground the new second battery. Currently there is a very thick ground cable that looks to run back to the engine, I am guessing there must be a way I can use that somehow to ground the new battery.
Any suggestions or pictures would be great.
This is on a 2013 LSV.2023 Craz
2013 LSV
-
05-12-2017, 02:06 AM #2
Senior Member
- Join Date
- May 2013
- Location
- Gainesville, GA
- Posts
- 151
This is how I set mine. Picture is from another member and not my original work!IMG_0086.jpg
-Blaine
2019 Makai
2013 LSV (sold)
1997 Bayliner 1850 (sold)
-
05-12-2017, 07:23 AM #3
Senior Member
- Join Date
- Oct 2004
- Location
- Middle TN
- Posts
- 148
You will need to ground the new battery the same way, you need to either tie it to the other battery or ground it to the block.
-
05-12-2017, 08:43 AM #4
Member
- Join Date
- Jul 2015
- Posts
- 80
Connect it to the other battery.
-
05-12-2017, 10:13 AM #5
Junior Member
- Join Date
- Jun 2015
- Location
- Fargo
- Posts
- 29
Perfect, that is the information I was looking for. Thanks!
2023 Craz
2013 LSV
Reply With Quote