LSV moomba flow?

**parrothd** · 06-09-2014, 10:56 AM

I'm running a bag under the seat as well, however I haven't seen any movement. My boat has L brackets from the factory that brace that section. Forgetting to turn the pump off as it lifts everyone up and freaks them out is a different matter...

mmandley, what speeds where you running?

**mmandley** · 06-09-2014, 06:06 PM

Originally Posted by parrothd

I'm running a bag under the seat as well, however I haven't seen any movement. My boat has L brackets from the factory that brace that section. Forgetting to turn the pump off as it lifts everyone up and freaks them out is a different matter...

mmandley, what speeds where you running?

Regular I want to say 10.5 to 11 mostly. I had no brackets when I cut the cooler out of mine. Not sure why but thats why mine began to bow outwards towards the center of the boat. I stopped using the bag under the seats because I was afraid it would spider crack the fiberglass.

**coldwatersurf** · 01-28-2015, 06:55 PM

Originally Posted by ninedriver

Just wondering if anyone has installed the flow on an LSV and how well it works.

I was hoping there would be an answer to the original question....has anyone used it on an '08 or similar hull?

**parrothd** · 01-28-2015, 07:56 PM

Naw..

Probably better to do a ghetto gate, cheaper, probably better than the flow..

Thread: LSV moomba flow?

Thread Tools

Display

Re: LSV moomba flow?

Posting Permissions