




The other day I noticed while toting some kids on a tube that the prop sounded like it lost its bite and the engine reved. It was on a sharp turn in some rough water, but I never had that happen on my Outback DD. It did it twice while doing the same thing. Just wondering if any of you have had this happen, or if this could be something else, like transmission? My boat is an 06 XLV and we didn't have any ballast at the time.
Medic
Medic151
06 Mobius XLV
I have had that happen, I think it is just a little cavation when you turn.
Bruce Fuerstenberg
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting...holy shit!...what a ride!
I have had that happen, I think it is just a little cavation when you turn.
Bruce Fuerstenberg
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting...holy shit!...what a ride!
I had it happen on my Outback DD just last week. I was taking kids from Camp Kemo tubing. It has never happened kneeboarding or skiing. We kneeboard with a few people and about 1000 pounds of ballast.
While turning with tubers in tow, it reved high enough to shut the engine off. Did not experience this but once so I wrote it off as cavatation. No other problems or experiences with it so no big deal, hopefully you wont notice it again.
I mess with Texas
At just the right speed, if you perform a QUICK S-Turn, you create a large air-bubble under your hull. I've never heard of a boat getting so much air the engine "safes" itself - but good to know.
-J
Joe:
I had 7 kids, me, and a camp couselor in the boat and two tubers on 75 feet of line on a 6-foot diameter tube... definately doing large s turns at 20 to 25 mph... dont know for sure why the engine shut off, but i resumed that style of driving for the next three hours and it never happened again. Probably one of those instances that I could not make occur (again) if i tried.
I mess with Texas