Results 1 to 10 of 21
-
09-22-2009, 03:08 PM #1
Wiring Harness (or plug) for Tower Speaker/Lights
Where can you buy a wiring harness to wire up 4 speakers and a 5 light bar on the tower and have a plug through the gelcoat like there is from factory for the Navigation Light on the tower? I would imagine I'll need to come down the passenger side for the sound and lights and would like it to match the other side. And would like to confirm size of Rad-a-cage on 07 outback (if i had to guess i'd say 1-5/?
2007 Moomba Outback - going, going, GONE
2015 "NOT A MOOMBA"
Why Not? Play Hard! Get wet
-
09-22-2009, 05:54 PM #2Member
- Join Date
- Aug 2009
- Posts
- 61
wirecare.com...
Factory wire plugs and pins. Just hooked my tower speakers up last weekend. Have pics if needed.
-
09-23-2009, 12:07 AM #3
2007 Moomba Outback - going, going, GONE
2015 "NOT A MOOMBA"
Why Not? Play Hard! Get wet
-
09-23-2009, 08:48 AM #4
I too would like to see setup. I just ran wires thru hull but would like to clean and add plug since i drop the tower to store boat.
2014 Mojo Surf
2013 Mojo Sold
2010 LSV Sold
2002 OB LSV Sold
-
09-23-2009, 09:32 AM #5
-
09-23-2009, 11:47 AM #6
http://www.onlyinboards.com/Ski-boat...krypt-dyi.html
http://www.bartswatersports.com/cata...ctor/index.asp
the skylon is pretty priceyA Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
09-23-2009, 11:21 PM #7
-
09-24-2009, 03:50 PM #8
I picked up one of the Krypt style ones off eBay for about $36 earlier this spring. The Krypt is not quite as low profile as the one shown above but works well. I guess it is the same style of plug they use for bands/instruments that play outdoors.
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
03-27-2010, 07:05 PM #9
BUMP!
Still searching........anybody else know where to track one down?
2007 Moomba Outback - going, going, GONE
2015 "NOT A MOOMBA"
Why Not? Play Hard! Get wet
-
03-27-2010, 07:45 PM #10Senior Member
- Join Date
- Oct 2009
- Location
- Lockport, IL/Cloverdale, MI
- Posts
- 185
Here is where I got mine...doing tower speaker install, haven't drilled into boat yet:
http://www.deutschconnector.com/prod...es_connectors/2008 Outback V