Results 61 to 70 of 207
Thread: my 08 LSV mods
-
03-12-2010, 05:53 PM #61
-
03-12-2010, 06:33 PM #62
Not sure if this is directed to me, i dont recall the exact size. I went to ACE Hardware with the fitting in my hand and test fit them till it fit. I know its a fat black O Ring so it can be squished a bit and still not allow the O Ring to touch. I actually have another threw Hull fitting and i will stop in Monday to get the O Ring and get back with ya.
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
03-12-2010, 06:47 PM #63
Yeh Mike, that was for you. I'll just do the same. ACE isn't too far from my place, so I'll swing by this weekend with a fitting and see what I can find. Thanks!
2015 Supra SC400
08 LSV - Sold
Go big, or go home.
-
03-14-2010, 02:23 AM #64
1" Thru hull fittings
Got the new thru hulls installed. Not much to see, but thought I'd show the location.
Last edited by brain_rinse; 01-31-2013 at 10:09 PM.
-
03-14-2010, 02:37 AM #65
Ballast Vents
I added vents to each bag and tied them into the drain lines. You can see the check valve and wye fitting in this pic. This is hidden by the carpeted panels in the lockers and out of sight up above the drivers footwell. I reused the factory 3/4" fill lines so it was fairly inexpensive.
Last edited by brain_rinse; 01-31-2013 at 10:09 PM.
-
03-14-2010, 10:57 AM #66
-
03-14-2010, 03:08 PM #67Member
- Join Date
- May 2009
- Posts
- 68
wow, killin it with the mods. good stuff!!
-
03-14-2010, 09:09 PM #68
Yep, the thru hulls are in the bilge area and are for the pumps I'm adding. I started fresh with 1" thru hulls rather than reusing the factory grated intake since that was only 3/4". You can see the layout of the pumps in one of the pics above. 2 tsunami 1200 pumps on each 1" thru hull.
Thanks! I haven't really done anything major, just little stuff to make the boat work better for me.
-
03-14-2010, 10:30 PM #69
Ohh nice man nice. I'm still planning out my ballast upgrade, I havnt forgot your offer yet, just really trying to get this stereo project done.
I hope i can get it done before the Tech and Tune this Sunday at Exile. We are having issues getting the equipment in at the moment.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
03-24-2010, 12:45 AM #70
2007 Moomba Outback - going, going, GONE
2015 "NOT A MOOMBA"
Why Not? Play Hard! Get wet