Results 1 to 4 of 4
  1. #1
    Join Date
    Jun 2018
    Location
    Lay Lake, AL
    Posts
    53

    Default 2009 Moomba exhaust hoses

    My son just bought a 09 Mobius Lsv. Its leaking at the rear where exhaust tubes go out rear fiberglass. I have looked for replacement flaps and hoses but am not having any luck. does anyone know where i can look or what to do to stop this leaking?


    Thanks

  2. #2
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    2,035

    Default

    Can you take a photo? Is it leaking where it joins/touches the fiberglass or at a fitting? And by leaking, I am guessing you mean water is coming in and not an exhaust gas leak?

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  3. #3
    Join Date
    May 2013
    Location
    Vancouver WA
    Posts
    5,041

    Default

    The if you're thinking that the problem is the plastic through hulls themselves, those parts are no longer available. I had to go to great lengths to find some stainless steel ones that would even fit and work as a replacement. It meant new elbows on the inside and new connections to my homemade fresh air exhaust surf pipe on the outside. And simply drilling a few new mounting screw holes. Oh and I also had to cut off a little of the through hull pipes I bought, Because they had this weird funky downturn that I didn't need.

    My plastic through hulls ultimately failed because they melted because something affected the cooling of the engine like the cover popping off the raw water pump, or the raw water pump not priming, or the valve being Left on running it from the hose versus pulling from the raw water intake... Whatever the reason, if your engine gets hot enough it will melt the plastic and the OEM elbows won't be able to clamp on them effectively.

    Sent from my SM-A546E using Tapatalk
    2008 Moomba Mobius XLV. Monster Cargo Bimini, WS Rev 410's, Polk Cabins, 3 Infinity Subs, PPI amps, WS420, Exile BT, upgraded ballast pumps, up to 3,500+ pounds of ballast, Blue LED's...
    1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.
    Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2009 Audic A6 Avant 3.0T, 2005 Kawasaki ZX-6R 636.
    www.TraysonsToybox.com

  4. #4
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,264

    Default

    Just loosen the screws at the back of the transom pull the fitting out a bit and re silicone it back onto the hull, did this on my 09 supra
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •