![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
My son just bought a 09 Mobius Lsv. Its leaking at the rear where exhaust tubes go out rear fiberglass. I have looked for replacement flaps and hoses but am not having any luck. does anyone know where i can look or what to do to stop this leaking?
Thanks
Can you take a photo? Is it leaking where it joins/touches the fiberglass or at a fitting? And by leaking, I am guessing you mean water is coming in and not an exhaust gas leak?
Sent from my SM-G781V using Tapatalk
2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
The if you're thinking that the problem is the plastic through hulls themselves, those parts are no longer available. I had to go to great lengths to find some stainless steel ones that would even fit and work as a replacement. It meant new elbows on the inside and new connections to my homemade fresh air exhaust surf pipe on the outside. And simply drilling a few new mounting screw holes. Oh and I also had to cut off a little of the through hull pipes I bought, Because they had this weird funky downturn that I didn't need.
My plastic through hulls ultimately failed because they melted because something affected the cooling of the engine like the cover popping off the raw water pump, or the raw water pump not priming, or the valve being Left on running it from the hose versus pulling from the raw water intake... Whatever the reason, if your engine gets hot enough it will melt the plastic and the OEM elbows won't be able to clamp on them effectively.
Sent from my SM-A546E using Tapatalk
2008 Moomba Mobius XLV. Monster Cargo Bimini, WS Rev 410's, Polk Cabins, 3 Infinity Subs, PPI amps, WS420, Exile BT, upgraded ballast pumps, up to 3,500+ pounds of ballast, Blue LED's...
1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.
Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2009 Audic A6 Avant 3.0T, 2005 Kawasaki ZX-6R 636.
www.TraysonsToybox.com
Just loosen the screws at the back of the transom pull the fitting out a bit and re silicone it back onto the hull, did this on my 09 supra
09 21v LAUNCH
99 Outback LS. Sold
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
Doug